Convenience design combine power supply and screw counter.
* Compatible with PLC based process control system; accurate counting on screw fastening.
* Auto leaning function built-in could judge the best setting value.
* Able to setting running speed & timing by Slow-Start function.
* Selection on auto-reset retrieval or manual reset retrieval.
* Enhances the auto-identified screw fastening time mode, allow user to aim at simulating the duration of specific screw fastening.
* Displaying the number of unfinished screw counts, user can add external sensor switch to prevent operation error.
* Buzzer alert while complete a fastening cycle. Internal signal for detecting screw count is also able to connect external devices.
* Capable with output and input signal; accurate calculation through the signal of sensor to prevent improper operation. Suitable for semi or full automatic production line.
BRUSHLESS POWER SUPPLY INTEGRATE WITH SCREW COUNTER
(WITH CE/UL CERTIFICATED)(6 PIN) ~ Function Upgrade – V3.0
Model # SP-BC40HL501T/C6
| Model # | SP-BC40HL501T/C6 |
| Input Voltage | AC 100-240V, 50/60HZ |
| Output Voltage | DC 40V/32V/24V 5.5A |
| Count | 1- 99 |
| Count Method | Count-up / Count-down |
| Reverse Resuming | ON / OFF |
| Work with Sensor | ON / OFF |
| GATE Sensor | ON (2 Sensor) / OFF (1 Sensor) |
| Slow-Start Time Adjustable | 0- 9.9 seconds |
| Slow-Start Speed Adjustable | Lo: 100%
L1-L9: 35%-85% Rated speed |
| Running Time Limit – LO | 0.0- 9.9 seconds |
| Running Time Limit – HI | 0.0- 9.9 seconds |
| Reminder Mode | On / OFF / FF / EF
with LED and buzzer |
| Auto ZERO | ON / OFF |
| Screwdriver Control | HI / LO: Slow-Start |
| Dimensions | 247x130x100mm |
| Weight | 2.4 kgs |
* POWER SUPPLY WITH CE CERTIFICATED
* Recommend: To be ordered with the screwdriver together
Suitable Model:EA-BN203 ~ EA-BN650
EA-BAN960 ~ BTN9180
0.2~180kg/cm (0.02~18 Nm)